Driving Schedule

Start the engine
Shift gear selector to drive
Accelerate gently to 1500-2000 RPM
Drive for 5 minutes at 1500-2000 RPM
Run the engine at idle speed for 60 seconds
Drive engaged, air conditioning (A/C) off
Drive for 6 minutes at 1500-2000 RPM
Run the engine at idle speed for 40 seconds
Drive engaged, air conditioning (A/C) switched off
air conditioning (A/C) off
Drive for 5 minutes at 1500-2000 RPM
Run the engine at idle speed for 60 seconds
Drive for 5 minutes at 1500-2000 RPM
Engine brake from 4000 RPM to approximately 1300 RPM a few times.
NOTE:
Do not use the accelerator pedal (AP) during engine braking.
Press the accelerator pedal (AP) to the floor a few times.

The above driving schedule does not cover leak diagnostic and thermostat diagnostic.