Checking The Component
- Ignition off
- Disconnect the connector in the heater.
Measure the resistance of overheat protection thermostat terminals #C5 and #C6.
Measure the resistance of engine coolant temperature (ECT) sensor terminals #C3 and #C4.
Compare the measured resistance values with the values in the component specification.
Remedy as necessary.
Other information
- see SIGNAL SPECIFICATION
- see COMPONENT SPECIFICATION
- see FUEL FIRED BOOSTER HEATER WATER-IN-FUEL SENSOR (2005-09) and FUEL FIRED BOOSTER HEATER WATER-IN-FUEL SENSOR (B5254T3, L. H. D; 2005-07)
- Continue
Refer to VERIFICATION