Connecting The Breakout Box
- Ignition off
- Remove fuses F3, F4, F12, F16 and F18 from the integrated relay/fusebox in the engine compartment
- To expose the connectors for the central electronic module (CEM), see CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
Connect breakout box see 9511428 to the adapter.
Disconnect the breakout box in reverse order.
NOTE:
Before the control module can be checked and measurements taken, the removed fuses must first be reinstalled.
Central electronic module (CEM)
- Connect adapter see 9512899 to control module connectors A, B, C, D, E, F, G and H.
- For connector A, terminals #A1-#A46 correspond to terminals #1-#46 in the breakout box, when the breakout box is connected to output A
- For connector B, terminals #B1-#B32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output B
- For connector C, terminals #C1-#C46 correspond to terminals #1-#46 in the breakout box, when the breakout box is connected to output C
- For connector D, terminals #D1-#D14 correspond to terminals #1-#14 in the breakout box, when the breakout box is connected to output D/H
- For connector E, terminals #E1-#E41 correspond to terminals #1-#41 in the breakout box, when the breakout box is connected to output E
- For connector F, terminals #F1-#F32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output F
- For connector G, terminals #G1-#G32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output G
- For connector H, terminals #H1-#H32 correspond to terminals #15-#46 in the breakout box, when the breakout box is connected to output D/H.
Other information