Text Message In The Driver Information Module (Dim)

Fig 1: Checking Traffic Load On CAN Cables

Courtesy of VOLVO CARS CORPORATION

HINT: By holding in the trip odometer reset button for 10 seconds the text ID for the relevant text message is displayed in the Driver Information Module (DIM). 

• Turn the ignition key to position II.
• Depress the trip odometer reset button.

  Hold the button depressed until the relevant text ID is displayed in the Driver Information Module (DIM).

• Scroll between the messages in the Driver Information Module (DIM) by pressing the READ button.

  Search for the text message related to the key, the ignition or steering column lock.

• Select an alternative below

The relevant text ID: 

1. Text ID 162. Refer to CHECK THE DIAGNOSTIC TROUBLE CODES (DTCS) FOR TEXT ID 162 .
2. Text ID 166. Refer to CHECK DIAGNOSTIC TROUBLE CODES (DTCS) FOR TEXT ID 166 .
3. Text ID 251. Refer to CHECK DIAGNOSTIC TROUBLE CODES (DTCS) FOR TEXT ID 251 .
4. Text ID 252. Refer to CHECK LOAD ON STEERING COLUMN LOCK .
5. Text ID 165. Refer to CHECK LOAD ON STEERING COLUMN LOCK .

Fig 2: View Of Steering Column & Steering Column Lock

Courtesy of VOLVO CARS CORPORATION