Internal Antennas In The Passenger Compartment
GENERAL
Type
SPOL antennas
Characteristic
Resistance depends on outside temperature and the length of the cables in the vehicle. A guide value is approx. 10-30 Ω
Resistance in the antenna should be 0 Ω or infinite.
Other information
Option.
TERMINAL
| Connector terminal | Control module terminal | Signal type | Miscellaneous |
|---|---|---|---|
| #C2 | #C1-2 | Antenna signal (-), inner antenna in cargo compartment | Signal only upon antenna activation. |
| #C4 | #C1-4 | Antenna signal (+), inner front antenna | Signal only upon antenna activation. |
| #C16 | #C1-16 | Antenna signal (-), inner front antenna | Signal only upon antenna activation. |
| #C18 | #C1-18 | Antenna signal (+), inner antenna in cargo compartment | Signal only upon antenna activation. |
TERMINAL
| Connector terminal | Control module terminal | Signal type | Miscellaneous |
|---|---|---|---|
| #B37 | #C2-14 | Antenna signal (+), inner center antenna | Signal only upon antenna activation. |
| #B40 | #C2-17 | Antenna signal (-), inner center antenna | Signal only upon antenna activation. |
CHECK
Prerequisites (unless otherwise specified):
- Breakout box connected.
- Antenna connected
Check
Antenna
Measure the resistance between the antenna connections
The value should be 10-30 Ω.
The antennas can also be checked using a function in the control module.