Position Sensor 7/119, 7/121
GENERAL
Type
Resistance sensor.
Characteristic
Resistance between #C1:1 and #C1:4 changes linearly depending on angle.
TERMINAL
POSITION SENSOR 7/119
| Connector terminal | Control module terminal | Signal type | Miscellaneous |
|---|---|---|---|
| #C1:1 | #C1:9 | Ground | |
| #C1:2 | - | ||
| #C1:3 | - | ||
| #C1:4 | #C1:20 | Signal, position sensor | |
| #C1:5 | #C1:19 | Power supply, +5V |
POSITION SENSOR 7/121
| Connector terminal | Control module terminal | Signal type | Miscellaneous |
|---|---|---|---|
| #C1:1 | #C1:8 | Ground | |
| #C1:2 | - | ||
| #C1:3 | - | ||
| #C1:4 | #C1:18 | Signal, position sensor | |
| #C1:5 | #C1:17 | Power supply, +5V |
CHECK
Prerequisites (unless otherwise specified):
- Sensor connected.
- Ignition switch position II.
Check 1
Position sensor:
Measure direct current between #C1:1 and #C1:4. The value should be:
U≈1.5-3.8 V at ignition position II.