Engine Control Module (ECM) [2009-2010, B6304T2 | 2011-2016, B6304T4 | 2010, B6324S; B6324S2 | 2011-2015, B6324S4; B6324S5]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
CAUTION:
If a new module is to be installed the adaptation values must be downloaded before removal.
Remove the plenum cover, refer to: PLENUM COVER
NOTE:
Make sure that the component terminals are not bent or damaged.
Torque: M6, 10Nm