Parameters, Status

TESTING OPTICAL FIBERS

Indicates if the 3 dB switch is on or off.

Normal = the MOST network has normal light intensity.

-3 dB = the MOST network's light intensity is reduced by 3 dB.

NUMBER OF NODES AFTER RING BREAK

Indicates the status of the result of the ring break diagnostic.

Value set:

OK = diagnostic ok

Diagnosis multimaster = one of more control modules beside the infotainment control module (ICM) thinks it is master node on the MOST network.

Diag all modules slave = all control modules, including the infotainment control module (ICM), consider to be a slave node on the MOST network.

Poor signal = the light intensity is too low for the Infotainment Control Module (ICM) to decode the signal.

Undefined = the infotainment control module (ICM) cannot interpret the result.

MOST LOCKED

Indicates whether the MOST network is closed and communication possible.

OK = communication possible.

not OK = communication not possible.

BUTTONS ON CONTROL MODULE

Indicates if the selected button on the infotainment control module (ICM) is pressed in or not.

EJECT , AM , FM , cd , Mode

Released = the control module interprets the button as not being pressed in.

Pressed in = the control module interprets the selected button as being pressed in.

WARM-UP DISPLAY

Indicates if the display warm-up has been activated or not. The possible values are:

IR SENSOR

Indicates if the IR sensor has been activated or not. The possible values are: