Installing Trailer Module (TRM)

Courtesy of VOLVO CARS CORPORATION

Use:  Isopropyl, part number 1161721

• Wipe dry.

Courtesy of VOLVO CARS CORPORATION

Use:  Isopropyl, part number 1161721

• Wipe dry.

Courtesy of VOLVO CARS CORPORATION

• Get the two Velcro straps from the kit and press them together, edge to edge.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

• Remove the backing tape from one side of the Velcro straps.

Courtesy of VOLVO CARS CORPORATION

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

Courtesy of VOLVO CARS CORPORATION

• Remove the masking tape

Courtesy of VOLVO CARS CORPORATION

• Press the control module into place.

  When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

APPLIES TO CARS MODEL YEAR FROM 2013- 

Courtesy of VOLVO CARS CORPORATION

• Locate the connectors in the car's cable harness.

Courtesy of VOLVO CARS CORPORATION

• Plug in the located connectors.

APPLIES TO CARS MODEL YEAR UP TO AND INCL. -2012 

Courtesy of VOLVO CARS CORPORATION

• Fold aside the insulation.

Courtesy of VOLVO CARS CORPORATION

• Locate the connectors.

Courtesy of VOLVO CARS CORPORATION

• Connect the extension cable harness to the located connectors.

Courtesy of VOLVO CARS CORPORATION

• Route the extension cable harness along the existing cable harness.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

• Plug in the connectors from the extension cable harness to the control module.

ALL VEHICLES 

Courtesy of VOLVO CARS CORPORATION

• Press in the catches on the black lid on the fuse holder and remove it.

Courtesy of VOLVO CARS CORPORATION

• Install 40A fuse in position FA 11 in module RJB-A.
• Reinstall the cover.