Other Information

FUEL LEVEL 

Presents current fuel level on the pump side as a value between 0-5 V.

FUEL LEVEL, EJECTOR SIDE 

Presents current fuel level on the ejector side as a value between 0-5 V.

Applies only to cars with saddle tank.

THE WINDSHIELD WASHER FLUID LEVEL 

Displays the status of the windshield washer fluid level.

Above 1 liter = there is more than 1 liter of washer fluid left in the reservoir.

Below 1 liter = there is less than 1 liter of washer fluid left in the reservoir.

POWER SUPPLY TO PEDALS 

Indicates the status of the power supply to sensors at the accelerator pedal (AP), brake pedal and clutch pedal.

The value can be activated or not activated.

SIGNALS FROM THE STEERING WHEEL MODULE (SWM) TO THE CENTRAL ELECTRONIC MODULE (CEM), VIA LIN. 

Indicates the command transmitted via LIN during activation of any of the functions on the steering wheel module (SWM).

SIGNALS FROM THE LIGHT SWITCH MODULE (LSM) TO THE CENTRAL ELECTRONIC MODULE (CEM), VIA LIN. 

Indicates the command transmitted via LIN during activation of any of the functions on the light switch module (LSM).

HAZARD WARNING SIGNAL FLASHERS, STATUS 

Displays the status of the hazard warning signal flasher switch.

Activated = The switch for the hazard warning signal flashers is activated.

Not activated = The switch for the hazard warning signal flashers is not activated.

TWILIGHT SENSOR, VOLTAGE, VALUE 

Measurement range: 0.25 - 4.90 V.

Shows the present light intensity.

Increased light intensity reduces the voltage over the photodiode.

SOLAR SENSOR, VOLTAGE, VALUE 

Measurement range: 0.15 - 4.85 V.

Shows the present light intensity.

Increased light intensity reduces the voltage over the photodiode.

From and including structure week 200746, the sun sensor has been replaced with twin sensors. 

FRONT POSITION SENSOR, VALUE (ONLY ON VEHICLES FROM MODEL YEAR 2012) 

Measurement range 0 -5 V. Shows the sensor signal for the front position sensor on the vehicle without the Suspension module (SUM). The engine must be running for the sensor to be supplied with voltage.

REAR POSITION SENSOR, VALUE (ONLY ON VEHICLES FROM MODEL YEAR 2012) 

Measurement range 0 -5 V. Shows the sensor signal for the rear position sensor on the vehicle without the Suspension module (SUM). The engine must be running for the sensor to be supplied with voltage.