Component Specifications
SHIFT SOLENOIDS
| Component | Note | Resistance (Ω) |
| Gear shift solenoid S1, S2 | Resistance between the solenoid pins and the solenoid casing/transmission housing. | +20°C = 11-16 Ω |
Other values, see diagram. When measuring at other temperature than +20 °C the check-measurement shall be performed at +20 °C. This is to ensure if the resistance is correct or not.
LINEAR PRESSURE SOLENOID SLT, SLB1, SLC1, SLC2, SLC3 AND LOCK-UP SOLENOID SLU
| Component | Note | Resistance (Ω) |
| Lock-up solenoid (SLU) Line pressure solenoids (SLT), (SLB1),(SLC1),(SLC2),(SLC3) |
Resistance between solenoid pins. | +20 °C= 5.0 - 5.6 Ω |
Other values, see diagram. When measuring at other temperature than +20 °C the check-measurement shall be performed at +20 °C. This is to ensure if the resistance is correct or not.
OIL TEMPERATURE SENSOR
| Component | Note | Resistance (Ω) |
| Oil temperature sensor | Resistance between the temperature sensor terminals. | +10°C = 5620-7310 Ω |
| +25 °C = 3500 Ω | ||
| +110°C = 220-270 Ω |
Resistance decreases with increasing temperature.
A test measurement must be taken at both temperatures. This is to establish if the resistance is correct or not.
SOLENOID P-POSITION LOCKOUT
| Component | Note | Resistance (Ω) |
| Solenoid p-position lockout | Resistance between the solenoid's connections | +20°C = 35-37 Ω |