April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibrating The Position Sensor In The Control Module

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS CORPORATION

Ignition on
Place the gear selector lever in neutral position (N).
Activate calibration of the position sensor in the control module by clicking on the VCT2000 symbol in VIDA (Volvo scan tool).

CAUTION:
During calibration, it is important that no diagnostic trouble codes (DTCs) for the gear selector module (GSM) are stored and that the gear selector assembly is otherwise free of faults.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)
Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Control Module/Gear-Shift Position Sensor
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to READING OFF DIAGNOSTIC TROUBLE CODES (DTCS)