Installing Receiver

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fill the recommended volume of compressor oil. See: AC-SYSTEM, OIL, REFILLING .

NOTE:

Install the receiver within 5-10 minutes of the plugs having been removed. This prevents the absorbent material absorbing moisture from the air.

Install:

the receiver together with 3 M8 screws. Tighten
the pipe couplings, 2 x M8. Make sure the O-rings are securely located. Tighten the screws
the M8 nut below the fender liner. Tighten
the fender liner together with the plastic nut and the retaining clip.