Signal Missing: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Switch on the ignition for at least 10 seconds.

  Read off the control module ID from the engine control module (ECM) by clicking on the VCT2000 symbol in VIDA (Volvo scan tool).

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

  Courtesy of VOLVO CARS CORPORATION

Could the control module ID be read off? 

• YES 

  VERIFIED:   Troubleshooting has been completed.

• NO 

  Refer to INFORMATION