Replacing The Component

The CD module (MP2) has registered an internal fault.

If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can be caused by interference at start up of the CD module (MP2) or may be a different type of fault which occurs on different occasions. The fault is evaluated depending on how it occurs. If the fault recurs, replace the CD module (MP2).

In the event of a permanent fault, replace the CD module (MP2).

Remedy as necessary.

Other information: 

• To replace the CD module (MP2), see MINIDISC / CD CONTROL MODULE, REPLACING .

• Continue 

  Refer to VERIFICATION