Checking Wiring / Back-Up (Reversing) Light Switch
Check the cable between the central electronic module (CEM) terminal #1A and the back-up (reversing) lamp switch terminal #2 (3/10). Check for an intermittent short-circuit to ground.
Also check the back-up (reversing) lamp switch. Check for an intermittent short-circuit to ground.
Remedy as necessary.
Other information:
- For information on the central electronic module (CEM):
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To access the back-up (reversing) lamp switch, see BACK-UP LAMP SWITCH, REPLACING .
- Continue
Refer to INFORMATION