LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2012 >> XC90 Base, FWD >> Repair and Diagnosis (Single Page) >> Restraints >> Passive Restraints >> Electronic Modules - Design And Function >> Driver Information Module (Dim). (2003-2014) >> Diagnostic Functions >> Description Of The Scrolling Values (Other Signals)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description Of The Scrolling Values (Other Signals)

Fuel level, value 

Signal from the two fuel level sensors in the rear electronic module (REM). The value displays between 0 and 80 liters depending on the amount of fuel in the tank.

Engine coolant temperature, value 

An engine coolant temperature (ECT) display. The signal comes from the engine control module (ECM) and the temperature is displayed in Celsius.

Engine speed (RPM), value 

An engine speed (RPM) display. The signal is between 0 and 8000 rpm and comes from the engine control module (ECM).

Vehicle speed, value 

The vehicle speed can be read off. The signal comes from the Brake Control Module (BCM) or the transmission control module (TCM) via the Control area network (CAN).

Brake fluid level, value 

The sensor is directly connected to the driver information module (DIM). Indicates whether the control module interprets the signal as low or high level.

Parking brake, value 

The sensor is directly connected to the driver information module (DIM). Indicates whether the control module interprets the signal as activated or not activated. With the parking brake applied the sensor is activated.

The SRS indicator lamp status, value 

The Driver Information Module (DIM) informs the Supplemental Restraint System Module (SRS) if the indicator lamp is working or is defective.

Cruise control, value 

Indicates whether the cruise control status is on or off.