Diagnostic Trouble Code Information BCM-C110668
Condition
After the steering angle sensor has been initialized, there is a plausibility check of the steering angle.
If the check is not passed and speed exceeds 50 km/h (31 mph), diagnostic trouble code BCM-C110668 is generated.
The plausibility check can be passed after BCM-C110687 is generated but before the ignition is turned off. If the check is not finished within one minute, BCM-C110687 is also generated.
Substitute Value
- AYC is blocked.
Possible Source
- The steering angle did not pass the plausibility check.
NOTE:
This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.
Fault symptom[s]
- General warning light on.
- The anti-skid function is not operational.