Reprogramming BCM

NOTE:

The diagnostic trouble code may also be stored if the brake control module (BCM) has been tested in another vehicle that does not have engine B8444S.

The diagnostic trouble code may in certain cases have been stored after reprogramming of the brake system control module (BCM). If this is the case, then the brake control module (BCM) must be configured.

Fig 1: ABS Control Module

Courtesy of VOLVO CARS CORPORATION

Is the diagnostic trouble code stored after reprogramming of the brake control module (BCM)?

YES
see RESETTING AND CONFIGURING THE BRAKE CONTROL MODULE (BCM)
NO
see ERASING DIAGNOSTIC TROUBLE CODES (DTCS)