Diagnostic Trouble Code (DTC) Information DDM/PDM-E010

Condition 

The diagnostic trouble code (DTC) is generated if the voltage to the driver door/passenger door module (DDM/PDM) differs from the voltage to the central electronic module (CEM) by more than 2 V.

The driver door/passenger door module (DDM/PDM) receives information on voltage to the central electronic module (CEM) via the CAN network.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is on.

Substitute Value 

• None.

Possible Source 

• Cable short-circuited to ground.
• Open-circuit on cable.
• Contact resistance.
• Half-blown fuse to driver door/passenger door module (DDM/PDM).

Fault symptom[s] 

• Driver door/passenger door switch panel not working.