Diagnostic Trouble Code (DTC) Information Mmm-5020
Condition
The multimedia module (MMM) checks internal control module components.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Problem reading the data from the hard disk.
- The fault is active for longer than two minutes.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Reading data from the hard disk.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Damaged multimedia module (MMM).
Fault symptom[s]
- Fault message displayed on display
- Navigation; No Functionality