Setting The Driver's Seat Using The Remote Control

This only applies to cars with power driver's seats with memory.

When this function is activated, the position of the seat and door mirrors will be stored when the car is locked with the remote control. When the same remote control is used to unlock the car, the driver's seat and door mirrors will be set to the positions stored for that specific remote control. Up to three remote controls can be stored.

The parameters that can be programmed are:

• Seat operation via remote control, active
• Seat operation via remote control, not active

The setting for automatic adjustment of the front seats will remote control is programmed via the vehicle communication socket under function group 8, Power seat (power seat module (PSM)), Programming remote control settings.