Control Module Fuel Pump (FP), Replacing: Removal

Fig 1: Identifying Ignition In OFF Position

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Covers Over Seat Rails

Courtesy of VOLVO CARS CORPORATION

Remove: 

• the covers over the seat rails
• screws, 4 pcs.

Lift out the seat on the right-hand side.

Fig 3: Installing A New Module

Courtesy of VOLVO CARS CORPORATION

Fold up the carpet. Detach the sill trim panel slightly.

Carefully lift up the insulation block and place a block under the insulation block to access the module.

Disconnect the connector and remove the old module from the Velcro.

Remove the block and fold the carpet back. Press the sill trim panel into place.