Checking The Fault Status
- Start the engine.
Read off the diagnostic status and fault status for the diagnostic trouble code (DTC) by selecting the relevant diagnostic trouble code (DTC) from the list.
Check whether the fault is permanent or intermittent. Read off the diagnostic trouble code (DTC) fault status when the diagnostic status is "Completed".
HINT: In some cases several functions of the component will be diagnosed. The affects the amount of time taken to run the diagnostic.
The fault is permanent if the fault status is "Fault found". If the fault status is "No fault found" the fault is intermittent and not presently active.
- Continue
Refer to CHECKING COMPONENTS AND WIRING