Faulty Configuration: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Reinstall the connectors, components, etc.
• Ignition on
• Erase diagnostic trouble codes using the VCT2000 (or appropriate scan tool)
• Start the car. Allow the car to run for 10 minutes.
• Read off diagnostic trouble codes (DTCs).

  Does the diagnostic trouble code (DTC) for a communication fault recur (CEM-1A5X or CEM-1A6X)?

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Does the diagnostic trouble code (DTC) recur? 

• YES 

  See: INFORMATION 

• NO 

  OKAY:  Troubleshooting has been completed.