Diagnostic Trouble Code (DTC) Information
Condition
For any type of key communication to occur, i. e. unlocking, locking, passive start or activating and deactivating the key, the keyless vehicle module (KVM) carries out a communication check using remote keyless entry (RKE). The diagnostic trouble code (DTC) is stored if the control module registers that the signal is incorrect.
The diagnostic trouble code (DTC) can always be diagnosed when the car is supplied with power.
Substitute Value
- None.
Possible Source
- Short-circuit to supply voltage in the signal cable
- Short-circuit to ground in the signal cable.
Fault symptom[s]
- Cannot be controlled with the remote control.