Diagnostic Trouble Code (DTC) Information ECM-9810

Condition 

Fig 1: Identifying Engine Control Module (ECM)

Courtesy of VOLVO CARS CORPORATION

The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers an internal fault indicating that the calculated engine speed (RPM) in the internal monitoring functions differs from the normal calculated engine speed (RPM) in the engine control functions.

The diagnostic trouble code (DTC) is diagnosed with the engine running and at an engine speed (RPM) above 520 RPM.

Substitute Value 

• Engine speed (RPM) and torque are limited to a calculated normal operating range.

Possible Source 

• Damaged engine control module (ECM).

Fault symptom[s] 

• Maximum engine speed (RPM) too low
• Cruise control does not work at all
• Uneven idle
• Malfunction indicator lamp (MIL) lit.