Transmission Control Module (TCM) [2008-2010, B6304T2, TF-80SC AWD]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure that the selector lever is in the neutral (N) position.
Perform battery disconnecting and connecting, refer to: BATTERY DISCONNECTING AND CONNECTING
Remove auxiliary drive component bracket, refer to: AUXILIARY DRIVE COMPONENT BRACKET
CAUTION:
Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the TCM electrical connector are not bent or damaged.
Torque: Gear selector mechanism (nut), 16Nm