Checking For Open-Circuits And Short-Circuits
Check the cable between sun roof module (SRM) terminal #10A and ground, left A-post. Check for a short-circuit to supply voltage.
Check the cable between the sun roof module (SRM) terminal #1A and fuse 11C/7 (11C/13 XC90) in the passenger compartment fuse box for a short-circuit to ground or an open-circuit.
Replace the cable if a fault is found.
After carrying out repairs, the sun roof module (SRM) should be calibrated. See SUN ROOF MODULE (SRM), CALIBRATING .
Other information:
- For further information about signals and other values, see SIGNAL DESCRIPTION, UPPER ELECTRONIC MODULE (UEM) .
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX .
- To access the sun roof module (SRM) connector, see CONTROL MODULE, SUN ROOF, REPLACING .
- see CHECKING WIRING AND TERMINALS .
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
Refer to REPLACING THE COMPONENT