Parameters SSTATUIS
GSM IMEI NUMBER (MARKETS WITH GSM ONLY)
The parameter indicates the unique number (International Mobile Equipment Identity) that belongs to the Phone Module (PHM).
CAPACITY OF THE EMERGENCY BATTERY (VOLVO ON CALL)
The parameter indicates the remaining capacity of the internal emergency battery, which is only installed if the Phone Module (PHM) has Volvo On Call function. the emergency battery is only used upon activation of Volvo On Call when the standard power supply is missing. The remaining capacity for the backup battery is calculated by the Phone Module (PHM).
Measurement range: 0 - 100%. 100% is full capacity.
When the remaining capacity is 15%, the Phone Module (PHM) stores a DTC.
- 0 % corresponds to 0 minutes call time
- 10 % corresponds to approximately 10 minutes call time
- 20 % corresponds to approximately 20 minutes call time
- 30 % corresponds to approximately 30 minutes call time
- 40 - 100 % corresponds to more than 30 minutes call time
SIGNAL STRENGTH RECEPTION WLAN
The parameter indicates the signal strength for WLAN (wireless local area network) for the Phone Module (PHM).
Measurement range 0 - 31.
Active SIM card
The parameter indicates the active SIM card.
The following status values can be readout:
- Unknown.
- Internal SIM card.
- External SIM card (P-SIM).
GPS Received position, latitude (Volvo On Call)
The parameter is used by the Phone Module (PHM) with the Volvo On Call function. The Phone Module (PHM) receives the signal from the Infotainment Head Unit (IHU). In order for a valid value to be shown, the Infotainment Head Unit (IHU) must have a fix on the vehicle's GPS position, if this has not occurred, the value 0° is shown. For optimum results, position the vehicle outside.
This parameter displays the latitude of the last received position of the vehicle.
The Phone Module (PHM) transmits the signal together with other vehicle data when a Volvo On Call service is activated.
GPS RECEIVED POSITION, LONGITUDE (VOLVO ON CALL)
The parameter is used by the Phone Module (PHM) with the Volvo On Call function. The Phone Module (PHM) receives the signal from the Infotainment Head Unit (IHU). In order for a valid value to be shown, the Infotainment Head Unit (IHU) must have a fix on the vehicle's GPS position, if this has not occurred, the value 0° is shown. For optimum results, position the vehicle outside.
This parameter displays the longitude of the last received position of the vehicle.
The Phone Module (PHM) transmits the signal together with other vehicle data when a Volvo On Call service is activated.
USB COMMUNICATION ESTABLISHED THIS DRIVING CYCLE
Indicates whether communication between Phone Module (PHM) and Infotainment Head Unit (IHU) has been established during this driving cycle. Can assume the values "Yes" and "No".
USB COMMUNICATION STATUS
Indicates the actual communication between Phone Module (PHM) and Infotainment Head Unit (IHU). Can assume the values: "No communication" and "Communication established".