LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2014 >> XC90 3.2 R-Design, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control Module (ECM) Diagnostic Trouble Codes - 7 Of 13 >> ECM-929C: Engine Control Module (ECM). Signal Too High (B5254T2; 2005-2007) >> Signal Too High >> Fault-Tracing Information >> Adaptation Of The Throttle Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Adaptation Of The Throttle Unit

NOTE:

The ignition must be switched on for at least 30 seconds after the basic conditions are met in order for the adaptation to start. It takes approximately 10 seconds to run the adaptation.

Fig 1: Identifying Ignition ON
GLL101051Courtesy of VOLVO CARS CORPORATION
Fig 2: Connecting Connector
GLL101069Courtesy of VOLVO CARS CORPORATION


NOTE:

The ignition must be switched on for at least 30 seconds after the basic conditions are met in order for the adaptation to start. It takes approximately 10 seconds to run the adaptation.

Fig 1: Identifying Ignition ON
GLL101051Courtesy of VOLVO CARS CORPORATION
Fig 2: Connecting Connector
GLL101069Courtesy of VOLVO CARS CORPORATION