Parameters, Status

DAMPER MOTOR RECIRCULATION 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

DAMPER MOTOR TEMPERATURE LEFT. 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

AIR DISTRIBUTION DAMPER MOTOR. 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

SEAT HEATER, LEFT-HAND FRONT 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

SEAT HEATER, LEFT-HAND REAR 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

SETA HEATER REAR SWITCH 

Indicates status of the selected node on LIN bus 1.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

SEAT HEATER, RIGHT-HAND FRONT 

Indicates status of the selected node on LIN bus 2.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

SEAT HEATER, RIGHT-HAND REAR 

Indicates status of the selected node on LIN bus 2.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

HUMIDITY SENSOR 

Indicates status of the selected node on LIN bus 2.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

DAMPER MOTOR, DEFROSTER 

Indicates status of the selected node on LIN bus 2.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

DAMPER MOTOR, TEMPERATURE, RIGHT 

Indicates status of the selected node on LIN bus 2.

Value set:

Node not installed/initialized.

Node detected but not expected.

Node expected but not detected.

Detected as expected.

STATUS, AIR QUALITY SENSOR 

Indicates the status of the Air quality sensor

Level 0 = No increase or decrease in pollutant level.

Level 1 = Slow increase in pollutant level.

Level 2 = Medium increase in pollutant level.

Level 3 = Rapid increase in pollutant level.

Warm-up phase = The sensor is currently heated to function correctly.

Defective heater pad = The heater pad that heats the sensor is defective.

Stand by mode = The sensor is not active but listens to the data communication to be able to start, if necessary.

COMMUNICATION, AIR QUALITY SENSOR 

Indicates the communication status of the sensor.

OK = Communication OK.

Not OK = Communication not OK.

AUTO DEFROSTER REAR WINDSHIELD 

Indicates the status of the Auto defroster in the rear windshield.

Off = The function is inactive.

ON = The function is active.