Description Of Reading Off Extended Diagnostic Trouble Code (DTC) Information
CONTENTS
Select type of description.
DESCRIPTION OF FROZEN VALUES
EXPLANATION
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored. Not all parameters can be read off for all diagnostic trouble codes (DTCs). The parameter values can only be read off where they can provide more information about the prevailing circumstances when the diagnostic trouble code (DTC) was stored.
GLOBAL TIME, VALUE
The value indicates the time since the central electronic module (CEM) was first powered. The value is given in seconds.
TOTAL MILEAGE, VALUE
Measurement range: 0-1, 000, 000 km
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.
MECU POWER SUPPLY, VALUE
Measurement range: 0-63 V
Normal range: 12.0 - 14.5 V
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.
PASSENGER COMPARTMENT TEMPERATURE, VALUE
Measurement range: -40 to +215 °C
The value indicates the passenger compartment temperature when the diagnostic trouble code (DTC) was stored.
OUTSIDE TEMPERATURE, VALUE
Measurement range: -40 to +215 °C
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored.
POWER SUPPLY POSITION, STATUS
The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
- Key removed
- Key recently removed
- Key approved
- Ignition off after Accessory position
- Accessory position
- Accessory position after Ignition on
- Ignition on
- Running
- Start attempts
- Signal missing
FAULT INFORMATION, ACTIVE PARKING ASSISTANCE (PAP)
Indicates fault cause in event of problem with Active parking assistance (PAP):
- Electric power steering, activation not possible
- Electric power steering activated but switches off due to incorrect request.
- Electric power steering, deactivation not possible
- Signal relationship fault