Description Of Reading Off Of Extended Diagnostic Trouble Code (DTC) Information

DESCRIPTION OF FROZEN VALUES

EXPLANATION

Frozen values are parameter values that are stored when a diagnostic trouble code is generated. Not all parameters can be read out for all diagnostic trouble codes. The parameter values can only be read if they can provide additional information on the prevailing conditions when the code was generated.

TOTAL MILEAGE, VALUE

Measurement range: 0 - 1, 000, 000 km.

The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.

VEHICLE SPEED

The value indicates the vehicle's speed when the Diagnostic Trouble Code (DTC) was generated.

GLOBAL TIME

The value indicates the time since the central electronic module (CEM) was powered the first time. The Side Obstacle Detection Control Module Left/Right (SODL)/(SODR) obtains the value via the control area network (CAN) from the central electronic module (CEM). The value is given in minutes.

MECU POWER SUPPLY, VALUE

Measurement range 0 - 63 V.

Normal range: 12.0 - 14.5 V.

The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

OUTSIDE TEMPERATURE, VALUE

Measurement range: -40 to +215 °C.

The value indicates the outside temperature when the diagnostic trouble code was generated.

POWER SUPPLY POSITION, STATUS

The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.

Key removed

Key recently removed

Key approved

Ignition off after Accessory position

Accessory position

Accessory position after Ignition on

Ignition on

Combustion engine running

Combustion engine in auto-stop

Combustion engine in start attempt

Combustion engine in start attempt at manual start