Transmission Control Module (TCM) [2017-2018, B4204T11, TG-81SC | 2017-2018, B4204T11, TG-81SC AWD]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure that the selector lever is in the neutral (N) position.
Perform battery disconnecting and connecting, refer to: BATTERY DISCONNECTING AND CONNECTING
Remove the air filter housing, refer to: AIR CLEANER HOUSING
Torque: Gear selector mechanism (nut), 16Nm
Remove the nuts.
Fold marked part aside.
Torque: M6, 10Nm
CAUTION:
Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the TCM electrical connector are not bent or damaged.
Disconnect the connector.
Remove the screws.
Torque: M8, 24Nm