Steering Wheel Module (SWM) [2017]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure that the road wheels are in the straight ahead position.
Set the vehicle to Inactive mode, described in user mode, refer to: USAGE MODE
Remove the following items:
- steering wheel, refer to: STEERING WHEEL
- Panel steering column, refer to: PANEL STEERING COLUMN
Ground connection
NOTE:
The graphic shows the back of the component before removal.
Remove the cable harness clips.
Disconnect the connectors.
Remove the screws.
Torque: Steering wheel module, to Steering column, 2.8Nm
CAUTION:
Observe caution when carrying out this step.
- Tilt the component somewhat.
- Release the lock.
- Remove the marked part.