Handling Non-Deployed Pyrotechnical Part [2017]: Notes
HANDLING NON-DEPLOYED SRS-COMPONENTS
Non-deployed pyrotechnical SRS components must not be deployed/ignited inside the vehicle. See DISCARDING PYROTECHNIC COMPONENTS .
WARNING:
Destroying non-deployed pyrotechnical SRS components.
The SRS component is to be removed as specified in the instructions below.
Remove:
- the air bag on the driver's side, refer to: DRIVER'S AIRBAG
- the air bag on the passenger side, refer to: AIRBAG, PASSENGER SIDE
- the airbags (SIPS) in the seats, refer to: AIR BAG, FRONT SEAT
- the side air curtains (IC), refer to: INFLATABLE CURTAIN
- the front safety belt tensioners, refer to: FRONT SAFETY BELT RETRACTOR
- the rear safety belt tensioners, refer to: SEAT BELT RETRACTOR, REAR
- the supplemental restraint system module, refer to: AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM
- the steering wheel.
- the contact reel/steering wheel module (SWM), refer to: STEERING WHEEL MODULE
Other information on the SRS system after a collision, refer to: HANDLING DEPLOYED PYROTECHNICAL PART .
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed pyrotechnical SRS component. There is a risk of deployment.
WARNING:
A pyrotechnical SRS component must never be unscrewed, repaired or moved to another vehicle.