Description Of Activating Components / Functions

ACTIVATIONS 

DAMPER SOLENOIDS, CONTROLLING 

Controlling the pulse width modulation (PWM) signal to the damper solenoid. The solenoid is activated by a pulse width modulation (PWM) signal from the control module. Activation can be carried out by each damper solenoid individually.

POWER SUPPLY 1, SENSOR 

Power supply to sensor, output1. Activating power supply (5 V) to the sensors connected to the control module's power supply output 1. Connected sensors to output 1 are; right-hand rear height sensor, right-hand front height sensor and all body acceleration sensors.

POWER SUPPLY 2, SENSOR 

Power supply to sensor, output 2. Activating power supply (5 V) to the sensors connected to the control module's power supply output 2. Connected sensors to output 2 are; left-hand front height sensor and left-hand rear height sensor.