Central Electronic Module (CEM) [2019-2022]: Installation
To install, reverse the removal procedure.
NOTE:
The following steps are only necessary when installing a new component.
Order and download the appropriate software according to VIDA/SOFTWARE.
Calibration according to: Diagnostics / Components / Control modules/ Central Electronic Module (CEM) / Diagnostic sequences / Calibration of brake pedal sensor and brake pedal angle sensor
NOTE:
This step is only necessary when installing a new component and the vehicle is equipped with parking heater, such as a fuel operated auxiliary heater or a high voltage coolant heater HVCH.
Clear parking climate history data according to: Diagnostics / Components / Control modules / Central Electronic Module (CEM) / Diagnostic sequences / Clear pre-conditioning statistics