Transmission Control Module (TCM) [2019, B4204T28, TG-81SC | 2020-2022, B4204T28; B4204T39, TG-81SD]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure that the selector lever is in the neutral (N) position.
Perform battery disconnecting and connecting. Refer to: [BATTERY DISCONNECTING AND CONNECTING]
Remove transmission actuator. Refer to: [TRANSMISSION ACTUATOR]
Disconnect the connector.
Remove the screws.
Remove the marked part.
Torque: M6, 10Nm
Fold marked part aside.
Release the lock.
Disconnect the connector.
Remove the screws.
Torque: M8, 24Nm
Remove the part carefully