Ignition Coil: Service and Repair

Ignition Coil Removal/Installation

FRONT

1. Remove the engine compartment covers. Service and Repair

2. Remove the harness clamp (A) and the bolt (B), then remove the harness holder (C) from the bracket.

3. Disconnect the ignition coil connectors (D), then remove the front ignition coils (E).

4. Install the front ignition coils in the reverse order of removal.






REAR

1. Remove the engine compartment covers. Service and Repair

2. Remove the strut brace. Service and Repair

3. Disconnect the ignition coil connectors (A), then remove the rear ignition coils (B).

4. Install the rear ignition coils in the reverse order of removal.