LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> TSX L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Replacement




Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the drive belt. Drive Belt Removal/Installation

3. Remove the two bolts securing the alternator.






4. Disconnect the alternator connector (A) and the positive alternator cable (B), and remove the harness clamp (C), then remove the alternator.






Installation

1. Install the alternator, then connect the alternator connector (A) and the positive alternator cable (B), and install the harness clamp (C). Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.






2. Tighten the two bolts securing the alternator.

3. Install the drive belt. Drive Belt Removal/Installation

4. Do the battery terminal reconnection procedure. Procedures





scientia non olet · About LEMON Manuals