Instrument Panel Control Module: Service and Repair

Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, retrieve the ODO data and transferring Maintenance Minder information from the gauge control module with the HDS Programming and Relearning.

1. Remove the instrument fascia Instrument Fascia Removal / Installation.

2. Remove the screws from the gauge control module (A).





3. Disconnect the connectors (B), and remove the gauge control module.

4. Install the gauge control module in the reverse order of removal.

5. Do rewriting the ODO data and transferring the Maintenance Minder data to a new gauge control module Programming and Relearning.

NOTE: Check any official Honda service website for more information on how to write odometer information to a gauge control module that will not communicate with the HDS.