Display Group 004

Only valid for transmission with hydraulic control E17

Display Group 003, Display Field (4) / Display Group 004, Display Field 1:

Note: For ATF temperature:
^ an indicated temperature of minus 50°C indicates a short circuit to Ground (GND)
^ an indicated temperature of minus 180°C indicates a short circuit to B+ or an open circuit

Only valid for transmission with hydraulic control E17

Display Group 004, Display Field (2):

Display Group 004, Display Field (3):

Display Field 3: (From Left To Right):

Note: For display field 3 of display group number 004:
^ The input signals of the Multi-function Transmission Range (TR) switch -FI25- 1) can be checked at the Transmission Control Module (TCM).

Only valid for transmission with hydraulic control E17

Display Group 004, Display Field (4):

Note: For display field 4 of display group number 004:
^ This display field 4 is only valid for vehicles without CAN bus, refer to next section for vehicles with CAN bus. A)
^ Engine intervention is only activated during the shifting process. Depending on the driving situation, engine intervention may only be activated briefly, i.e. the relatively slow data transfer to the VAG1551 can miss this brief engine intervention under certain driving conditions.

A) There is a distinction made between vehicles with and without CAN bus. For information on which vehicles are equipped with CAN bus

Only valid for transmission with hydraulic control E17

Display Group 004, Display Field (4):

Note: For display field 4 of display group number 004:
^ This display field 4 is only valid for vehicles with CAN bus, refer to previous display field 4 for vehicles without CAN bus. A)

A) There is a distinction made between vehicles with and without CAN bus. For information on which vehicles are equipped with CAN bus