Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel

Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel

Removal Procedure

1. Open the instrument panel (I/P) compartment door.

2. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement Service and Repair.





3. Remove the I/P antenna by pulling to disengage the antenna from the retaining bracket.

4. Disconnect the lead connector from the antenna wire harness.

Installation Procedure





1. Position the antenna to the I/P carrier.

2. Connect the wire harness lead to the antenna.

3. Push on the antenna to install the antenna to the retaining bracket.

4. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement Service and Repair.

5. Close the I/P compartment door.