Electronic Brake Control Module: Testing and Inspection

Electronic Brake Control Module Programming and Setup

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

* EBCM Reprogramming-Refer to Service Programming System (SPS) Service Programming System (SPS).

* Recalibrate the brake pedal position (BPP) sensor. Refer to Brake Pedal Position Sensor Replacement .

EBCM Reprogramming

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) Service Programming System (SPS).