Front Lamp Unit - Installation

LAMP UNIT

NOTE: If replacing the front lamp unit, the bulbs must be transferred to the new unit.

1. Connect the front lamp unit electrical connectors(5).

2. Position the front lamp unit into the fender/fascia pocket in vehicle.




3. Install the upper fastener closest to the center of the vehicle (3).









4. Install the upper fastener closest to the fender (4).





5. Install the lower facia support bracket (1) and the lower front lamp assembly fasteners (2).





6. Install the lower outboard fastener (6).
7. Reattach the fascia on the side that you are working on Front Bumper Fascia - Installation
8. Connect the battery negative cable.