Splash Shield - Installation

INSTALLATION





1. Position the splash shield (1) into the wheelhouse.
2. Install the three fasteners located at the top and rear lower areas of the splash shield (1). Tighten the fasteners securely.
3. If necessary, install the front wheel.





4. Install the three fasteners (1, 2) located forward of the wheel securing the splash shield to the vehicle. Tighten the fasteners securely.





5. Install the two fasteners (1) securing the cladding to the splash shield. Tighten the fasteners securely.





6. Install the splash shield to fascia fasteners (1). Tighten the fasteners securely.
7. Lower the vehicle.