Ignition Coil-On-Plug

Ignition Coil-On-Plug

Removal and Installation

LH side

1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering Air Cleaner Outlet Pipe.

Both sides

2. Disconnect the electrical connector from the ignition coil-on-plug.

3. Remove the bolt from the ignition coil-on-plug.
- To install, tighten to 6 Nm (53 lb-in).

4. Remove the ignition coil-on-plug.

5. To install, reverse the removal procedure.