Fog/Driving Lamp: Service and Repair

Fog Light Replacement

'09-11 models

1. Remove the mounting screw, then pull out the fog light (A) from the front bumper.





2. Disconnect the 2P connector (B), then remove the fog light.

3. Install the light in the reverse order of removal.

4. After replacement, adjust the fog lights Adjustments.

'12 model

1. Put a shop towel in the opening between the lower edge of the cap (A) and the fog light (B) to prevent scratches. Insert a flat-tip screwdriver wrapped with protective tape into the slot (C), and remove the cap.






2. Remove the mounting screw, then pull out the fog light (A) from the front bumper.





3. Disconnect the 2P connector (B), then remove the fog light.

4. Install the light in the reverse order of removal.

5. After replacement, adjust the fog lights Adjustments.